F3D-DK-0001Concept / تصميم مبدئي

Over-glass shower organizer

Two drainage baskets and two towel hooks, hung over a fixed glass panel

Not on sale yet

Designed and checked in CAD, not printed yet. The pictures are renders, not photographs. The price and ordering come once a printed prototype passes its tests.

Designed for
Fixed glass panel, 8 mm
Baskets
2 × 200 × 106 × 65 mm
Material
PETG, TPU pads

Two matte-black baskets on two printed rails that hook over the top of a fixed glass shower panel. Each basket's floor falls 3° to four S-shaped slots, so water runs out instead of sitting under the bottles. The lower basket leaves 237 mm of height: room for a tall pump bottle and your hand.

Each basket lifts off for cleaning: pull the two tabs at the back and lift. On the dry side, each rail ends in a towel hook.

The whole organizer is printed in PETG, in pieces that screw together, so it arrives in a small box. Only soft TPU pads touch the glass. Made for fixed panels 7.7–8.3 mm thick; not for sliding or hinged doors.

Specs
Designed for
Fixed glass panel, 8 mm
Baskets
2 × 200 × 106 × 65 mm
Material
PETG, TPU pads
Rails
printed, 25 × 25 mm, in 5 pieces each
Height
about 890 mm from the glass top
Drainage
4 slots, 6.5 mm wide, 3° fall
Towel hooks
2, on the dry side

You might also like